Development of a PM transverse flux motor with soft magnetic composite core

Guo, YG; Zhu, JG; Watterson, PA; Wu, W

Development of a PM transverse flux motor with soft magnetic composite core

Guo, YG

Zhu, JG

Watterson, PA Wu, W

Permalink

Publication Type:: Journal Article
Citation:: IEEE Transactions on Energy Conversion, 2006, 21 (2), pp. 426 - 434
Issue Date:: 2006-06-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download full textAdobe PDF (475.98 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Guo, YG https://orcid.org/0000-0001-6182-0684	en_US
dc.contributor.author	Zhu, JG https://orcid.org/0000-0002-9763-4047	en_US
dc.contributor.author	Watterson, PA	en_US
dc.contributor.author	Wu, W	en_US
dc.date.issued	2006-06-01	en_US
dc.identifier.citation	IEEE Transactions on Energy Conversion, 2006, 21 (2), pp. 426 - 434	en_US
dc.identifier.issn	0885-8969	en_US
dc.identifier.uri	http://hdl.handle.net/10453/5857
dc.description.abstract	This paper reports the design, performance analysis, fabrication, and experimental results of a three-phase, three-stack permanent magnet transverse flux motor with a soft magnetic composite stator core, which was designed to take advantage of the unique properties of the new material. Parameter computations by finite element analysis of the magnetic field and performance prediction by the equivalent electric circuit are discussed. To validate the simulation, a prototype motor has been fabricated and operated with a sensorless, brushless direct coupler drive scheme. The experimental results are thoroughly presented and agree with the theoretical calculations very well. © 2006 IEEE.	en_US
dc.relation.ispartof	IEEE Transactions on Energy Conversion	en_US
dc.relation.isbasedon	10.1109/TEC.2005.860403	en_US
dc.subject.classification	Electrical & Electronic Engineering	en_US
dc.title	Development of a PM transverse flux motor with soft magnetic composite core	en_US
dc.type	Journal Article
utslib.citation.volume	2	en_US
utslib.citation.volume	21	en_US
utslib.for	090608 Renewable Power and Energy Systems Engineering (excl. Solar Cells)	en_US
utslib.for	090607 Power and Energy Systems Engineering (excl. Renewable Power)	en_US
utslib.for	090699 Electrical and Electronic Engineering not elsewhere classified	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
pubs.organisational-group	/University of Technology Sydney/Strength - CHT - Health Technologies
utslib.copyright.status	open_access
pubs.issue	2	en_US
pubs.publication-status	Published	en_US
pubs.volume	21	en_US

Abstract:

This paper reports the design, performance analysis, fabrication, and experimental results of a three-phase, three-stack permanent magnet transverse flux motor with a soft magnetic composite stator core, which was designed to take advantage of the unique properties of the new material. Parameter computations by finite element analysis of the magnetic field and performance prediction by the equivalent electric circuit are discussed. To validate the simulation, a prototype motor has been fabricated and operated with a sensorless, brushless direct coupler drive scheme. The experimental results are thoroughly presented and agree with the theoretical calculations very well. © 2006 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/5857