Printed multiband metamaterial-inspired antennas

Dakhli, S; Rmili, H; Floc'H, JM; Sheikh, M; Dobaie, A; Mahdjoubi, K; Choubani, F; Ziolkowski, RW

Printed multiband metamaterial-inspired antennas

Dakhli, S Rmili, H Floc'H, JM Sheikh, M Dobaie, A Mahdjoubi, K Choubani, F Ziolkowski, RW

Permalink

Publication Type:: Journal Article
Citation:: Microwave and Optical Technology Letters, 2016, 58 (6), pp. 1281 - 1289
Issue Date:: 2016-06-01

Closed Access

	Filename	Description	Size
	Dakhli_et_al_MOTL_2016.pdf	Accepted Manuscript Version	895.99 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Dakhli, S	en_US
dc.contributor.author	Rmili, H	en_US
dc.contributor.author	Floc'H, JM	en_US
dc.contributor.author	Sheikh, M	en_US
dc.contributor.author	Dobaie, A	en_US
dc.contributor.author	Mahdjoubi, K	en_US
dc.contributor.author	Choubani, F	en_US
dc.contributor.author	Ziolkowski, RW https://orcid.org/0000-0003-4256-6902	en_US
dc.date.issued	2016-06-01	en_US
dc.identifier.citation	Microwave and Optical Technology Letters, 2016, 58 (6), pp. 1281 - 1289	en_US
dc.identifier.issn	0895-2477	en_US
dc.identifier.uri	http://hdl.handle.net/10453/65223
dc.description.abstract	© 2016 Wiley Periodicals, Inc. A family of multiband metamaterial-inspired dipole antennas are reported. These antennas are based on a dipole integrated in a planar configuration with capacitively loaded loops (CLLs) as their near-field resonant parasitic (NFRP) elements. In the realized structures, the number of operating frequencies is determined by the size of the CLLs and their proximity to the printed dipole. Simulation results explain the design features and demonstrate that the structures present a multiband behavior. Three corresponding prototypes were fabricated and tested. The measured impedance mismatch and radiation pattern results are presented and are shown to be in good agreement with their simulated values.	en_US
dc.relation.ispartof	Microwave and Optical Technology Letters	en_US
dc.relation.isbasedon	10.1002/mop.29792	en_US
dc.subject.classification	Networking & Telecommunications	en_US
dc.title	Printed multiband metamaterial-inspired antennas	en_US
dc.type	Journal Article
utslib.citation.volume	6	en_US
utslib.citation.volume	58	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
utslib.for	0205 Optical Physics	en_US
utslib.for	1005 Communications Technologies	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - GBDTC - Global Big Data Technologies
utslib.copyright.status	closed_access
pubs.issue	6	en_US
pubs.publication-status	Published	en_US
pubs.volume	58	en_US

Abstract:

© 2016 Wiley Periodicals, Inc. A family of multiband metamaterial-inspired dipole antennas are reported. These antennas are based on a dipole integrated in a planar configuration with capacitively loaded loops (CLLs) as their near-field resonant parasitic (NFRP) elements. In the realized structures, the number of operating frequencies is determined by the size of the CLLs and their proximity to the printed dipole. Simulation results explain the design features and demonstrate that the structures present a multiband behavior. Three corresponding prototypes were fabricated and tested. The measured impedance mismatch and radiation pattern results are presented and are shown to be in good agreement with their simulated values.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/65223