Map-based navigation of an autonomous car using grid-based scan-to-map matching
- Publication Type:
- Conference Proceeding
- Proceedings of the ASME Design Engineering Technical Conference, 2015, 3
- Issue Date:
Copyright Clearance Process
- Recently Added
- In Progress
- Closed Access
This item is closed access and not available.
© Copyright 2015 by ASME. This paper presents the map-based navigation of a car with autonomous capabilities using grid-based scan-to-map matching. The autonomous car used for demonstration is built based on Toyota Prius and can control the throttle, the brake and the steering by a computer. The proposed grid-based scan-to-map matching method represents a map with a finite number of grid cells, represents a scan and the map with scan points at each grid as normal distributions (NDs) and constructs a map by matching the scan NDs to the map NDs. The proposed method enables scan-based mapping at high speed while maintaining high accuracy. The representation of a grid cell of a map in terms of multiple NDs further enhances speed and accuracy. The accuracy analysis of the proposed method shows that a small robot with a wheel diameter of 8cm had yielded no loop closure error after the travel of 186m while the terminal position error by the GMapping was approximately 1m with the error growth of 1%. The application of the proposed method with the autonomous car has then demonstrated the ability of the proposed method for autonomous driving with varying and high speed and has also quantified the significance of speed for successful mapping in autonomous driving.
Please use this identifier to cite or link to this item: