A Dual-Band Dual-Polarized Omnidirectional Antenna for 2G/3G/LTE Indoor System Applications

Lai, J; Feng, B; Zeng, Q; Su, S

A Dual-Band Dual-Polarized Omnidirectional Antenna for 2G/3G/LTE Indoor System Applications

Lai, J Feng, B Zeng, Q Su, S

Permalink

Publication Type:: Conference Proceeding
Citation:: 2018 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2018, 2018
Issue Date:: 2018-12-06

Closed Access

	Filename	Description	Size
	08567727.pdf	Published version	243.48 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Lai, J	en_US
dc.contributor.author	Feng, B	en_US
dc.contributor.author	Zeng, Q	en_US
dc.contributor.author	Su, S https://orcid.org/0000-0002-5720-8852	en_US
dc.date.issued	2018-12-06	en_US
dc.identifier.citation	2018 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2018, 2018	en_US
dc.identifier.isbn	9781538679463	en_US
dc.identifier.uri	http://hdl.handle.net/10453/133491
dc.description.abstract	© 2018 IEEE. In this paper, we presented a dual-band dual-polarized (DP) omnidirectional antenna for 2G/3G/Long Term Evolution (LTE) indoor communication systems. Two modified cones compose the vertical polarized (VP) unit, which exhibits good omnidirectional radiation performance and achieves a wide impedance bandwidth. The loop antenna and the printed circular dipole arm arrays are arranged on the top end and middle end of the VP unit, respectively. They are connected by a commercial diplexer as the horizontal polarized (HP) units. Simulated results indicated that an impedance bandwidth of 790 MHz-1.14 GHz and 1.72-3.51GHz can be achieved for VP while another one of 806-980 MHz and 1.68-2.99 GHz is also obtained for HP. In the azimuth plane, omnidirectional radiation patterns for both VP and HP are achieved. For the lower and upper frequency bandsmore than 1 dBi and 3 dBi antenna gain are realized for both of the VP and HP radiations, respectively. Better port-to-port isolation, low cross polarization and little gain variation are also acquired.	en_US
dc.relation.ispartof	2018 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2018	en_US
dc.relation.isbasedon	10.1109/ICSPCC.2018.8567727	en_US
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	A Dual-Band Dual-Polarized Omnidirectional Antenna for 2G/3G/LTE Indoor System Applications	en_US
dc.type	Conference Proceeding
utslib.for	0906 Electrical and Electronic Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Biomedical Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CHT - Health Technologies
utslib.copyright.status	closed_access	*
pubs.publication-status	Published	en_US

Abstract:

© 2018 IEEE. In this paper, we presented a dual-band dual-polarized (DP) omnidirectional antenna for 2G/3G/Long Term Evolution (LTE) indoor communication systems. Two modified cones compose the vertical polarized (VP) unit, which exhibits good omnidirectional radiation performance and achieves a wide impedance bandwidth. The loop antenna and the printed circular dipole arm arrays are arranged on the top end and middle end of the VP unit, respectively. They are connected by a commercial diplexer as the horizontal polarized (HP) units. Simulated results indicated that an impedance bandwidth of 790 MHz-1.14 GHz and 1.72-3.51GHz can be achieved for VP while another one of 806-980 MHz and 1.68-2.99 GHz is also obtained for HP. In the azimuth plane, omnidirectional radiation patterns for both VP and HP are achieved. For the lower and upper frequency bandsmore than 1 dBi and 3 dBi antenna gain are realized for both of the VP and HP radiations, respectively. Better port-to-port isolation, low cross polarization and little gain variation are also acquired.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/133491