Robust adaptive backstepping sliding mode control for motion mode decoupling of two-axle vehicles with active kinetic dynamic suspension systems
- Publisher:
- WILEY
- Publication Type:
- Journal Article
- Citation:
- International Journal of Robust and Nonlinear Control, 2020, 30, (8), pp. 3110-3133
- Issue Date:
- 2020-05-25
Closed Access
Filename | Description | Size | |||
---|---|---|---|---|---|
rnc.4927.pdf | 2.43 MB |
Copyright Clearance Process
- Recently Added
- In Progress
- Closed Access
This item is closed access and not available.
© 2020 John Wiley & Sons, Ltd. A mode decoupling control strategy is proposed for the active Kinetic Dynamic Suspension Systems (KDSS) with electrohydrostatic actuator (EHA) to improve the roll and warp mode performances. A matrix transfer method is employed to derive the modes of body and wheel station motions for full vehicle with active KDSS. The additional mode stiffness produced by the active KDSS is obtained and quantitatively described with the typical physical parameters. A new hierarchical feedback control strategy is proposed for the active KDSS to improve the roll and warp motion performances and simultaneously accounting for nonlinear dynamics of the actuators with hydraulic uncertainties. H∞ static output-feedback control is employed to obtain the desirable mode forces, and a new projection-based adaptive backstepping sliding mode tracking controller is designed for EHA to deal with address the nonlinearity and parameters uncertainty. This controller is used to realize the desirable pressure difference of EHA required from the target mode forces. Numerical simulations are presented to compare the roll and warp performances between the active KDSS, conventional spring-damper suspension, and suspension with antiroll bar under typical excitation conditions. The evaluation indices are normalized and compared with radar chart. The obtained results illustrate that the proposed active KDSS with proposed controller does not produce additional warp motion for vehicle body, and has achieved more reasonable tire force distribution among wheel stations, the roll stability, road holding, and significantly improved ride comfort simultaneously.
Please use this identifier to cite or link to this item: