Numerical analysis of dynamic hysteresis in tape springs for space applications
- Publisher:
- Springer
- Publication Type:
- Conference Proceeding
- Citation:
- Vibration Engineering for a Sustainable Future: Active and Passive Noise and Vibration Control, Vol. 1, 2021, 1, pp. 179-184
- Issue Date:
- 2021
Closed Access
Filename | Description | Size | |||
---|---|---|---|---|---|
Martin2021_Chapter_NumericalAnalysisOfDynamicHyst.pdf | Published version | 352.94 kB |
Copyright Clearance Process
- Recently Added
- In Progress
- Closed Access
This item is closed access and not available.
Antennas for small satellites are often simple tape springs, which have great advantages in terms of cost and space- and energy consumption. However, they are liable to unwanted vibrations, which can jeopardize a satellites' mission. Vibrations of thin elastic structures
in space lead to energy dissipation, which is able to change the attitude behavior of a satellite in orbit.
The present study investigates the dynamical system of a metal tape spring using a nite element model based on Oberst et al. (2018) and time domain simulations. Mesh convergence studies for element and method
selection have been conducted. It is found that linear shell elements
S4 provide good enough results for the dynamic analysis. The Hilber-
Hughes-Taylor implementation and ABAQUS/Implicit are employed.
In a previous study of Oberst and Tuttle (2018) hystereses in the system's response during an excitation amplitude sweep have been experimentally observed, which are repeated here for the numerical model. Similar to the experimental study, hysteresis curves can be generated (Oberst and Tuttle, 2018). Whether the dynamics as well as the static hysteresis curves in opposite and equal sense bending direction obtained from the numerical model are similar to those determined experimentally needs to be studied in the near future.
Please use this identifier to cite or link to this item: