The effect of axial boundary conditions on breakout noise from finite cylindrical ducts
- Publisher:
- PERGAMON-ELSEVIER SCIENCE LTD
- Publication Type:
- Journal Article
- Citation:
- International Journal of Mechanical Sciences, 2023, 242
- Issue Date:
- 2023-03-15
Closed Access
| Filename | Description | Size | |||
|---|---|---|---|---|---|
| The effect of axial boundary conditions on breakout noise from finite cylindrical ducts.pdf | Accepted version | 2.79 MB |
Copyright Clearance Process
- Recently Added
- In Progress
- Closed Access
This item is closed access and not available.
Ductborne noise within HVAC and exhaust systems may transfer into the surrounding environment through the walls of the duct. This breakout noise normally needs to be lowered in order to meet health and safety guidelines. This means that the ability of the duct walls to lower breakout noise needs to be predicted during the design stage of the duct systems. Significant work has been conducted into the prediction of breakout noise for infinite length ducts, however there is little to be found on finite length ducts. In particular there are very few studies on the difference between finite and infinite length duct breakout, especially where the noise source lies within the internal fluid. The aim of this work is therefore to investigate the difference in breakout noise between finite length and equivalent infinite length ducts when excited by an internal noise source. This is performed through numerical experiments using the semi analytical finite element method which enables the equations of elasticity for the duct wall, as well as a surrounding fluid, to be accommodated. Axial continuity equations at each end of a finite length elastic duct are then enforced through the point collocation method. It is observed that high sound power levels are emitted at axial resonances of the finite length duct. In the low frequency region these resonances have a narrow bandwidth and are expected to be of little practical significance. However, above the critical frequency the resonance bandwidth increases and this is observed to significantly lower the transverse transmission loss of the duct wall when compared to an infinite length duct. This phenomenon is observed for both clamped and simply supported ducts, as well as for two different internal sound sources. It is concluded that breakout noise from axial resonances in finite length ducts should be examined in design calculations in order to avoid excessive breakout noise.
Please use this identifier to cite or link to this item: