| Field |
Value |
Language |
|
dc.contributor.author |
Li, NW |
|
|
dc.contributor.author |
Kwan, M-Y |
|
|
dc.contributor.author |
Yick, K-L |
|
|
dc.date.accessioned |
2025-03-24T04:39:49Z |
|
|
dc.date.available |
2025-03-24T04:39:49Z |
|
|
dc.identifier.citation |
Polymers, 17, (7), pp. 831-831 |
|
|
dc.identifier.issn |
2073-4360 |
|
|
dc.identifier.uri |
http://hdl.handle.net/10453/186168
|
|
|
dc.description.abstract |
<jats:p>Compression stockings have long been manufactured in a single color without patterns, but enhancing their aesthetic appeal through knitted designs can improve user compliance. This study explores the potential of punch lace knitted structures to create patterns in compression textiles by seamless knitting technology while maintaining sufficient pressure. The effects of yarn material, number of yarns used, and knitted patterns on pressure and thermal comfort will be studied. The fabric pressure was evaluated using pressure sensors with a leg mannequin, while the thermal properties were measured according to the textile standard. This study found that the pressure and thermal conductivity of fabric are significantly influenced by the number of yarn and yarn materials, but not the knitted pattern. Cupro/cotton/polyurethane yarn (A) exhibits the strongest positive impact on pressure, increasing by 2.03 mmHg with the addition of one end of yarn A while polyamide/lycra yarn (C) exhibits a higher thermal conductivity than yarn A. For air permeability, the number of yarn and knitted patterns significantly affects the ventilation resistance. Pattern B with an additional needle in a float stitch shows 0.023 kPa·s/m lower resistance than pattern A. The findings from this study can be widely used in health, medical, and sports applications.</jats:p> |
|
|
dc.language |
en |
|
|
dc.publisher |
MDPI AG |
|
|
dc.relation |
University of Technology Sydney |
|
|
dc.relation.ispartof |
Polymers |
|
|
dc.relation.isbasedon |
10.3390/polym17070831 |
|
|
dc.rights |
info:eu-repo/semantics/openAccess |
|
|
dc.subject |
03 Chemical Sciences, 09 Engineering |
|
|
dc.subject.classification |
34 Chemical sciences |
|
|
dc.subject.classification |
40 Engineering |
|
|
dc.title |
Pressure and Thermal Behavior of Elastic Polyurethane and Polyamide Knitted Fabrics for Compression Textiles |
|
|
dc.type |
Journal Article |
|
|
utslib.citation.volume |
17 |
|
|
utslib.for |
03 Chemical Sciences |
|
|
utslib.for |
09 Engineering |
|
|
pubs.organisational-group |
University of Technology Sydney |
|
|
pubs.organisational-group |
University of Technology Sydney/UTS Groups |
|
|
pubs.organisational-group |
University of Technology Sydney/UTS Groups/Centre for Audio, Acoustics and Vibration (CAAV) |
|
|
pubs.organisational-group |
University of Technology Sydney/UTS Groups/Centre for Audio, Acoustics and Vibration (CAAV)/Centre for Audio, Acoustics and Vibration (CAAV) Associate Members |
|
|
pubs.organisational-group |
University of Technology Sydney/New Faculty |
|
|
utslib.copyright.status |
open_access |
* |
|
dc.rights.license |
This work is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0). To view a copy of this license, visit https://creativecommons.org/licenses/by/4.0/ |
|
|
dc.date.updated |
2025-03-24T04:39:46Z |
|
|
pubs.issue |
7 |
|
|
pubs.publication-status |
Published online |
|
|
pubs.volume |
17 |
|
|
utslib.citation.issue |
7 |
|
