Issue Date | Title | Author(s) |
2022-03-07 | Chemical effect of sewage sludge ash on early-age hydration of cement used as supplementary cementitious material | Chang, Z; Long, G; Xie, Y; Zhou, JL |
2024-02 | Steel cable bonding in fresh mortar and 3D printed beam flexural behavior | Liu, Q; Cheng, S; Sun, C; Chen, K; Li, W; Tam, VWY |
2023-05-16 | A sustainable cementitious composite reinforced with natural fibers: An experimental and numerical study | Abedi, M; Hassanshahi, O; Rashiddel, A; Ashtari, H; Seddik Meddah, M; Dias, D; Arjomand, MA; Keong Choong, K |
2023-08-22 | Recycling industrial alkaline solutions for soil stabilization by low-concentrated fly ash-based alkali cements | Lal Mohammadi, E; Khaksar Najafi, E; Zanganeh Ranjbar, P; Payan, M; Jamshidi Chenari, R; Fatahi, B |
2023-08-22 | A state-of-the-art review on the utilization of new green binders in the production of controlled low-strength materials | Tran, TQ; Kim, YS; Dang, LC; Do, TM |
2023-04-01 | 3D printing for remote housing: Benefits and challenges | Bazli, M; Ashrafi, H; Rajabipour, A; Kutay, C |
2023-07-10 | Statistical assessment of tensile and shear properties of unreinforced clay brick masonry | Gooch, LJ; Masia, MJ; Stewart, MG; Lam, CY |
2023-09-08 | Experimental study of mechanical properties of G-UHPC against sodium sulfate attack at elevated temperature | Xu, S; Zheng, M; Yuan, P; Wu, P; Shao, R; Liu, Z; Liu, J; Wu, C |
2023-11-03 | Improving industrial drying process of recycled fine aggregates as a means of carbonation to improve the mechanical properties and plastic shrinkage of self-leveling mortar | Liu, Q; Tang, H; Chen, K; Sun, C; Li, W; Jiao, S; Tam, VWY |
2023-11-01 | Standardisation of low clinker cements containing calcined clay and limestone: a review by RILEM TC-282 CCL | Kanavaris, F; Vieira, M; Bishnoi, S; Zhao, Z; Wilson, W; Tagnit Hamou, A; Avet, F; Castel, A; Zunino, F; Visalaksh, T; Martirena, F; Bernal, SA; Juenger, MCG; Riding, K |