Predictive models for the geometrical characteristics of channels milled by abrasive waterjet

Nguyen, T; Wang, J; Kwok, NM; Li, H; Ha, QP

Predictive models for the geometrical characteristics of channels milled by abrasive waterjet

Nguyen, T Wang, J Kwok, NM Li, H Ha, QP

Permalink

Publication Type:: Conference Proceeding
Citation:: IEEE International Conference on Automation Science and Engineering, 2015, 2015-October pp. 1459 - 1464
Issue Date:: 2015-10-07

Closed Access

	Filename	Description	Size
	0177-CASE2015-Thai.pdf	Published version	771.18 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Nguyen, T	en_US
dc.contributor.author	Wang, J	en_US
dc.contributor.author	Kwok, NM	en_US
dc.contributor.author	Li, H	en_US
dc.contributor.author	Ha, QP https://orcid.org/0000-0003-0978-1758	en_US
dc.date.available	2015-05-16	en_US
dc.date.issued	2015-10-07	en_US
dc.identifier.citation	IEEE International Conference on Automation Science and Engineering, 2015, 2015-October pp. 1459 - 1464	en_US
dc.identifier.isbn	9781467381833	en_US
dc.identifier.issn	2161-8070	en_US
dc.identifier.uri	http://hdl.handle.net/10453/36944
dc.description.abstract	© 2015 IEEE. This paper presents an analysis of the abrasive waterjet (AWJ) milling performance. The milled channel characteristics are dominated by nine dimensionless variables representing the process parameters and material properties that govern the channel formation process. Predictive models considering these nine dimensionless variables are then developed for estimating the characteristics of the channels milled by an AWJ. The models are verified and found to agree well with the experimental data.	en_US
dc.relation.ispartof	IEEE International Conference on Automation Science and Engineering	en_US
dc.relation.isbasedon	10.1109/CoASE.2015.7294305	en_US
dc.title	Predictive models for the geometrical characteristics of channels milled by abrasive waterjet	en_US
dc.type	Conference Proceeding
utslib.citation.volume	2015-October	en_US
utslib.for	090506 Structural Engineering	en_US
utslib.for	1099 Other Technology	en_US
utslib.for	090602 Control Systems, Robotics and Automation	en_US
dc.location.activity	Gothenburg, Sweden
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CBI - Centre for Built Infrastructure
utslib.copyright.status	closed_access
pubs.publication-status	Published	en_US
pubs.volume	2015-October	en_US

Abstract:

© 2015 IEEE. This paper presents an analysis of the abrasive waterjet (AWJ) milling performance. The milled channel characteristics are dominated by nine dimensionless variables representing the process parameters and material properties that govern the channel formation process. Predictive models considering these nine dimensionless variables are then developed for estimating the characteristics of the channels milled by an AWJ. The models are verified and found to agree well with the experimental data.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/36944