Electrochemical studies on LiFe<inf>1-x</inf>Co<inf>x</inf>PO<inf>4</inf>/carbon composite cathode materials synthesized by citrate gel technique for lithium-ion batteries
- Publication Type:
- Journal Article
- Citation:
- Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 2008, 149 (1), pp. 93 - 98
- Issue Date:
- 2008-03-15
Closed Access
| Filename | Description | Size | |||
|---|---|---|---|---|---|
| 2009006358OK.pdf | Submitted Version | 753.98 kB |
Copyright Clearance Process
- Recently Added
- In Progress
- Closed Access
This item is closed access and not available.
LiFePO4/carbon and LiFe1-xCoxPO4/carbon (x = 0.02, 0.04, 0.08 and 0.1) composite cathode materials were synthesized by citrate gel technique. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to study the phase and morphology of un-doped and Co doped lithium iron phosphate/carbon composites. The SEM images revealed that the particles were agglomerated and the particle sizes were almost homogeneously distributed. The particle size was found to be between 200 and 300 nm from transmission electron microscopy. Cyclic voltammetric studies were taken to investigate the electrochemical performance of the prepared composite materials. The high intensity of the anodic and cathodic peaks indicates that Li-ions and electrons were participating actively in redox reactions due to the carbon coating. Charge/discharge studies carried out on a CR2032 coin cell revealed that the carbon coated LiFePO4/carbon composite exhibited an improved discharge capacity of 157 mAh/g at low rates. We found that cobalt doping does not have a favourable effect on the electrochemical performance of lithium iron phosphate cathode materials. © 2008 Elsevier B.V. All rights reserved.
Please use this identifier to cite or link to this item: